Home / concrete waste replaced by fine aggregate
USE OF WASTE PLASTIC AS FINE AGGREGATE SUBSTITUTE IN CONCRETE, hence in this study M20 cement concrete is considered in which the recycled plastic waste is used as the replacement of fine aggregate in the concrete. Concrete cube and beam were casted taking 10% to 25% of plastic as partial replacement of fine aggregatePartial Replacement of Fine Aggregate by Tannery Shredded Waste in Concrete, Partial Replacement of Fine Aggregate by Tannery Shredded Waste in Concrete Dr. M. Vijaya Sekhar Reddy 1 *, K. Ashalatha 2 , K. Sasi 2 1 Head and Assistant Professor, Department of Civil Engineering, Srikalahasteeswara Institute of Technology,CONSTRUCTION AND DEMOLISION WASTE AS A REPLACEMENT OF FINE AGGREGATE IN CONCRETE, The ratio of sand replaced to recycled fine aggregate are 100:0% as control, 80:20%, 50:50%, 20:80% and 0:. The project explains about the properties of materials used in concrete, mechanical and transport properties of the concrete..Experimental Investigation on Concrete with Replacement of Fine Aggregate by Lathe Waste, When fine aggregate is replaced with 4% of lathe waste, the increment in compressive strength test was 11% compared to conventional concrete, which indicated that the use of 4% replacement is also possible in order to maximise the waste utilisation.Disposing waste demolition in concrete as aggregate replacement, are limited to recycled concrete aggregate (RCA), waste glass (WG) and waste plastic (WP). Substitution percent (by weight) for all three waste materials are (0, 5, 10, 15 and 20). RCA is substituted by both fine and coarse aggregates, while WG and WP are.